Kzyee KS20Pro is a battery analysis tester, which can detect the health status of all 12V 24V lead-acid batteries, calculate the actual cold start capacity and aging degree of the battery, and provide reliable analytical evidence for battery testing and maintenance. It can also provide users with reliable data to test whether the battery charging system works normally. KZYEE KS20PRO can quickly judge the overall state of the starting system by analyzing the actual starting voltage, and can do continuity testing and diagnosis of circuit faults. It is the most revolutionary circuit tester.
- Battery Tester: Designed for 12V/24V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on CCA、SAE、IEC、EN、DIN、JIS and others Standards
- Cranking and Charging System Test: KS20pro battery tester displays the test result on the starter system, cranking voltage, and cranking time in milliseconds. Also, the battery diagnostic tool can check 12V or 24V charging system to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.
- Easy & Safe Operation: Strong and lightweight construction, well-arranged keypad, and menu-driven operation make this battery analyzer easier to operate. what's more, it don't need to connect to a large load discharge test, no damage to the battery. Keeps operation safe for all levels of users , good choose for everyone.
- Safe and Durable Clamps: The upgraded clamps make them not easy to crack in cold winter. Reverse polarity protection: It protects against any sparks in case of accidental reversal of battery polarities, to prevent danger.
- Wide Applications: Ideal for cars, heavy-duty trucks, RVs, motorbikes, boats, ATVs and even lawn tractors batteries, even support both in and out of vehicle test. That allows you to test a battery according to its location.
- Check Anywhere:KS20Pro automotive battery tester supports both in and out of the vehicle test. Works on cars, light trucks, heavy-duty trucks, motorcycle, minivans, boats, and more. Analyzes the battery health status, views battery charging status, and detects faults anytime and anywhere.
- Battery Diagnostic Doctor: Applied with the latest conductivity method to measure, quickly analyze the internal conditions of the battery, including health status, charging status, battery starting current, internal resistance and test conclusions.
Pretty handy tool to test your battery. I checked my sister's battery in her Toyota Sienna and it had a low reading so we pulled it out and bought a new one. Now she won't be stuck in some distant location.
- Charging Test: If the voltage value is higher than 15.0V(30V for 24V battery), please check the voltage regulator. If the voltage value is lower than 13.3V(26.6V for 24V battery), please check the connection point, cable, and electric generator.
- Professional Battery Test: KZYEE KS20Pro car battery tester measures the actual cold cranking amps capability of the vehicle starting battery, healthy state of the cell, and common fault of the vehicle starting system and charging system, which can help maintenance personnel to find the problem quickly and accurately, thus to help you better handle hidden failures.
- Cranking Test(Start-up test):If the voltage value is higher than 10.7V(21V for 24V battery), it means the cranking system is in good condition, no need to replace. If the voltage value is lower than 9.6V(16V for 24V battery), please replace it immediately.
- Load Test: If the minimum voltage value is higher than 12.8V(25.6V for 24V battery), it means the system is regular. If the minimum voltage value is lower than 12.8V(25.6V for 24V battery), please check if the generator belt is worn or the circuit is open circuit.
- Test car 12V&24V charging system(Detect alternator),
- Ideal for cars, heavy-duty trucks, RVs, motorbikes, boats, ATVs and even lawn tractors batteries,
- Test car 12V&24V cranking system(Display cranking voltage),
- Tests 12V and 24V batteries up to 2000CCA.
- Tests Both 12V and 24V Lead-acid Battery.
- Displays test result in seconds.
- Test the battery on a vehicle directly, do not need to remove it.
- Large display and classic menu-driven makes it easy to read and use
- Test battery rating systems: CCA(SAE), DIN, IEC, EN, JIS, and other standards.
- Clamps feature with reverse polarity protection, does not emit light, heat, or spark for safe operation.
- Compatible with Lead-acid, regular flooded, AGM flat plate, AGM spiral, GEL, and deep cycle battery.
- Multiple vehicle applications: light-duty or heavy-duty trucks, cars, motorcycle, minivans, boat, and more.
- Question: What is the difference between the kzyee ks20 and ks20pro?
Answer: We have upgraded according to the previous customer's suggestions. The KS20Pro is more accurate.
- Question: Will this test the actually cranking power, when starting the car?
Answer: Yes, it will analyze the actual cranking voltage, and tells you if the starting motor works correctly.